---
title: "Starlink : Enable Bypass Mode on the Starlink System"
description: "**Step 1:** - Perform a factory reset of the Starlink system. Firmly press and hold the Reset button located on the bottom of the antenna for at least 3 seconds. *The status light on the bottom on the antenna will…"
url: "https://help.globalsatellite.us/docs/starlink-enable-bypass-mode-on-the-starlink-system/"
updated: "2025-05-26"
category: Starlink
---

# Starlink : Enable Bypass Mode on the Starlink System

**Step 1:**

- Perform a factory reset of the Starlink system. Firmly press and hold the Reset button located on the bottom of the antenna for at least 3 seconds. *The status light on the bottom on the antenna will blink quickly while you are pressing the button then turn off as it reboots.*

**Starlink Reset Button**

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/Image111.png)

**Step 2:**

- Connect your mobile device to the **STARLINK** Wi-Fi network (no password).

**Starlink Wi-Fi Network Connection**

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/Image22-1.png)

***Note: As an alternative to Wi-Fi, you can use a laptop connected directly to the Starlink antenna with an Ethernet cable.***

**Step 3:**

- Open a web browser and go to **192.168.1.1**. You should see “Starlink Create Network.

**Starlink Create Network Page**

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/Image444.png)

- Select **Enable Router Bypass Mode**.
- Select **Confirm**.

**Confirmation Page**

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/enable-bypass.jpg)

**Step 4:**

- When you see the “Goodbye” message, you can close your browser.

**Goodbye Message**

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/goodbye.png)

**Connect the Starlink to the External Router**

- Unplug the Starlink’s power supply to disconnect power from the Starlink system.
- Using a Cat5E or better Ethernet cable, connect the Starlink antenna’s Ethernet port

**Starlink Ethernet Port**

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/Image222-1024x618.png)

**Starlink Mini Connection Diagram**

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/Capture-decran-2025-03-20-103423.jpg)

- Reconnect Starlink’s power supply.
