---
title: "V7-HTS: Clearing No-Transmit Zones"
description: "You can clear all no-transmit zones from the system’s memory. Unlike disabling zones, clearing zones permanently deletes them. | ![Alert_black_hollow_Help00001.png](https://progressive.kvh.com/help/v7htshelp/54-0890/No-Transmit_Zones/Alert_black_hollow_Help00001.png)   CAUTION | | --- | | Clearing no-transmit zones allows the antenna to transmit in any direction without restriction. Make sure…"
url: "https://help.globalsatellite.us/docs/v7-hts-clearing-no-transmit-zones/"
updated: "2025-03-24"
category: "KVH / KVH V7-HTS"
---

# V7-HTS: Clearing No-Transmit Zones

You can clear all no-transmit zones from the system’s memory. Unlike disabling zones, clearing zones permanently deletes them.

| ![Alert_black_hollow_Help00001.png](https://progressive.kvh.com/help/v7htshelp/54-0890/No-Transmit_Zones/Alert_black_hollow_Help00001.png)   CAUTION |
| --- |
| Clearing no-transmit zones allows the antenna to transmit in any direction without restriction. Make sure everyone stays the minimum safe distance away from the antenna while it is in use (see [RF Radiation Hazard Area](https://progressive.kvh.com/help/v7htshelp/54-0890/Introduction/RF_Radiation_Hazard_Area-.htm#XREF_79246_RF_Radiation)). |

NOTE: This procedure explains how to clear no-transmit zones using the TracPhone V7-HTS web interface. If you prefer, you may use the front panel LCD menu instead (go to Diagnostic Tools > Factory Reset).

To clear the no-transmit zones, follow these steps:

1. At the TracPhone V7-HTS web interface, click the **Settings** tab. Then click **No-Transmit Zones**.
2. Click **Edit**.
3. If the Login window appears, log in with the Administrator password.
4. In No-Transmit Zone Ranges, click **Clear Zones**.
5. At the confirmation message, click **Clear Zones**.

Clearing No-Transmit Zones

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/NTZ_clear_zones.png)
