---
title: "V7-HTS: Disabling No-Transmit Zones"
description: "You can disable your programmed no-transmit zones to temporarily remove all restrictions on transmissions. This function permits the antenna to ignore the zones; it does not delete them from the system’s memory. | ![Alert_black_hollow_Help.png](https://progressive.kvh.com/help/v7htshelp/54-0890/No-Transmit_Zones/Alert_black_hollow_Help.png)   CAUTION | | --- | | Disabling…"
url: "https://help.globalsatellite.us/docs/v7-hts-disabling-no-transmit-zones/"
updated: "2025-03-24"
category: "KVH / KVH V7-HTS"
---

# V7-HTS: Disabling No-Transmit Zones

You can disable your programmed no-transmit zones to temporarily remove all restrictions on transmissions. This function permits the antenna to ignore the zones; it does not delete them from the system’s memory.

| ![Alert_black_hollow_Help.png](https://progressive.kvh.com/help/v7htshelp/54-0890/No-Transmit_Zones/Alert_black_hollow_Help.png)   CAUTION |
| --- |
| Disabling no-transmit zones allows the antenna to transmit in any direction, even if the antenna is pointing in an area accessible to passengers and crew. Make sure everyone stays the minimum safe distance away from the antenna while it is in use (see [RF Radiation Hazard Area](https://progressive.kvh.com/help/v7htshelp/54-0890/Introduction/RF_Radiation_Hazard_Area-.htm#XREF_79246_RF_Radiation)). |

To disable the no-transmit zones, follow these steps:

1. At the TracPhone V7-HTS web interface, click the **Settings** tab. Then click **No-Transmit Zones**.
2. Click **Edit**.
3. If the Login window appears, log in with the Administrator password.
4. In No-Transmit Zone Ranges, click** Ignore Zones**.
5. Click **Save Settings**.
6. At the confirmation message, click **Ignore Zones**.

![](https://help.globalsatellite.us/wp-content/uploads/2025/03/NTZ_ignore_zones.png)
